Pressure Gauges Accessories

Product Details:

all 1/4 to 1 in. and 6 to 25 mm Swagelok stainless steel tube fittings to help installers make more consistent, leak-tight tube connections. In these sizes, a patented case hardening process and patented recessed and contoured geometry provide unique engineering to the Swagelok back ferrule. The hinging-colleting back ferrule design expands on the already robust performance of the traditional ferrule design.

1/4 inch to 1/2 inch BSP/NPT

Product Details:

Our organization is engaged in providing an exclusive range of Gauge Cock to our valued clients. Designed in compliance with industrial standards these cock and valve are widely used for isolating the pressure gauge from pressure medium or to throttle and to damp pressure pulses. These are widely appreciated for reliability and application specific design.

Features:

• PTFE adjustable packing installed below operating threads to prevent media
• Contamination or lubricant washout of operating threads
• Spindle for longer durable operation

Specifications:

Connection: 1/4" to 1/2" available
Size: 1/2" to 2" available

Additional Information:

• Item Code: 548751
• Production Capacity: 50000
• Delivery Time: reday stock
• Packaging Details: as per client

Product Details:

We are engaged in offering a wide range ofGauge Snubber to our clients. These are mainly used in pressure gauges. These are manufactured using high-quality raw material from our trustworthy vendors and therefore are of high strength and durable. These are available in various sizes and shapes.

Features:

• Precision designed
• Superior product quality

Product Details:

The most obvious gauge accessory is a shutoff valve between it and the process (Figure 5-2), which allows blocking while removing or performing maintenance. A second valve is often added for one of two reasons: draining of condensate in vapor service (such as steam), or, for higher accuracy applications, to allow calibration against an external pressure source.

Additional Information:

• Item Code: PED54725
• Production Capacity: 42500
• Delivery Time: REDAY STOCK
• Packaging Details: AS PER CLIENT

Product Details:

Additional Information:

• Item Code: PEDMPG
• Production Capacity: 9852465
• Delivery Time: REDAY STOCK
• Packaging Details: AS PER CLIENT

Product Details:

Pressure Gauge DesignsTwo common reasons for gauge (and switch) failure are pipe vibration and water condensation, which in colder climates can freeze and damage the gauge housing. Figure 1 illustrates the design of both a traditional and a more reliable, "filled" pressure gauge. The delicate links, pivots, and pinions of a traditional gauge are sensitive to both condensation and vibration. The life of the filled gauge is longer, not only because it has fewer moving parts, but because its housing is filled with a viscous oil. This oil filling is beneficial not only because it dampens pointer vibration, but also because it leaves no room for humid ambient air to enter. As a result, water cannot condense and accumulate. Available gauge features include illuminated dials and digital readouts for better visibility, temperature compensation to correct for ambient temperature variation, differential gauges for differential pressures, and duplex gauges for dual pressure indication on the same dial. Pressure gauges are classified according to their precision, from grade 4A (permissible error of 0.1% of span) to grade D (5% error).

Additional Information:

• Item Code: PE12546
• Production Capacity: 1500000
• Delivery Time: REDAY STOCK
• Packaging Details: AS PER CLIENT

Product Details:

all 1/4 to 1 in. and 6 to 25 mm Swagelok stainless steel tube fittings to help installers make more consistent, leak-tight tube connections. In these sizes, a patented case hardening process and patented recessed and contoured geometry provide unique engineering to the Swagelok back ferrule. The hinging-colleting back ferrule design expands on the already robust performance of the traditional ferrule design.

Product Details:

Additional Information:

• Item Code: PEDPPG
• Production Capacity: 5468257
• Delivery Time: REDAY STOCK
• Packaging Details: AS PER CLIENT

Product Details:

We are one of the trusted names in the market to offer a wide array of Gauges Savers. This range of the products is widely used for protecting pressure gauge against the effect of the pressure exerted on pressure rating of the gauge. This saves instruments from the over pressure. Our offered gauge save close at a set point protects instruments from overload. Gauge saver is intending to protect the pressure gauge against the effect of pressure that exceeds the maximum pressure rating of the pressure gauge.

Features:

• High performance
• Long service life
• Low maintenance

Connection: 1/2 inch NPT/BSP (M x F)

Product Details:

Application:
Pressure Gauge syphons are intended to protect the pressure gauge from the effect of hot pressure media such as steam and also to reduce the effect of rapid pressure surges. Condensate of the pressure medium that is collected inside the coiled or U-shaped portion of the syphon prevents direct contact. When first installed the syphon should be filled with water or any other suitable separating liquid.

Types: Available in Q type, O Type, Plate U Type, Straight U Type

Additional Information:

• Item Code: 654897
• Production Capacity: 256555
• Delivery Time: reday stock

Product Details:

Baumer 0 to 7 kg/cm² 100 mm Pressure Gauge BV-F-2-4BMby Baumer  

Additional Information:

• Item Code: PEDPG
• Production Capacity: 9854621
• Delivery Time: REDAY STOCK
• Packaging Details: AS PER CLIENT

Product Details:

Application:
Pressure Gauge syphons are intended to protect the pressure gauge from the effect of hot pressure media such as steam and also to reduce the effect of rapid pressure surges. Condensate of the pressure medium that is collected inside the coiled or U-shaped portion of the syphon prevents direct contact. When first installed the syphon should be filled with water or any other suitable separating liquid.

Types: Available in Q type, O Type, Plate U Type, Straight U Type

Product Details:

We as a manufacturer of Q type Syphon, 90 degree are well liked in the industries for providing customized solution for NPT, BSP, Butt Weld, flanges, Socket Weld or Compression outlets laden with fineness.

The provided Q type syphon can be selected in terms of pipe schedule or pressure rating

1. Based on the pipe schedule available options are: SCH 40, SCH 80, SCH 160, SCH XXS
2. Based on the pipe pressure rating available options are: 3000 psi, 6000 psi and 10000 psi
3. Common sizes are 3/8″ , 1/2″ ,3/4″ and 1″

Available Customizations: 

• Different Diameter of Coil
• Different Length of Coil
• Different End Connections
• Option of Multiple Coils in same Syphon

Material Options: 

• Stainless Steel
• Brass, Steel
• Monel, Hastelloy C
• Incoloy, Inconel 600.

Q Type Syphon, 90 Degree Applications 

• To protect pressure measuring instruments from excessive heating
• To protect pressure measuring instruments from vibration
• As a cooling element for gases, fluids and vapours in pressure instrument
• For direct mounting to the pressure connection of the pressure measuring instrument
• The steam syphon tube is used for steam boiler Applications